Mark this thread as Unsold
FS Turbo kit, Ball bearing, powder coated by LHT
09-06-2010, 08:15 AM
#1
FS Turbo kit, Ball bearing, powder coated by LHT
St Pete
First off this isn't your super high HP turbo kit that produces massive power levels ...and heat/problems. This is however a very clean kit, fast spool and 550whp potential and a direct bolt except for the 3" down pipe doesn't fit stock exhaust.
This kit made 418whp and 268 torque @13.6 psi with a 3" exhaust merged into dual 2.5" and custom intake manifold.It made 350 whp at around 9 psi.
Here's some specs/whats included:
Precision 5865 Ball bearing turbo V band Ceramic coated and custom heat sheild
LHT Log manifold ceramic coated
LHT 3" stainless down pipe with flex connector ceramic coated 2 o2 bungs
TIAL MVS wates gate
TIAL Q BOV ( Behind bumper)
LHT Custom intake SOLD
Precision intercooler as1025 anodised black with bolt on mounts
Aluminum intercooler piping, 2.5" powder coated bright silver blk connectors T bolts bung for intake temp and 1/8" bung for meth
-3 stainless feed with sandwich adaper
-12 stainless drain
4" intake and K+N Filter
Rack spacers, allow much cleaner pipe routing ( See pics) and better steering feel
Bracket and hose for coolant relocate
Fuse box reloation braket
The factory oil filter does fit, I run an oil cooler.
Here's some pics.
$4700 Shipped.UPS only.
First off this isn't your super high HP turbo kit that produces massive power levels ...and heat/problems. This is however a very clean kit, fast spool and 550whp potential and a direct bolt except for the 3" down pipe doesn't fit stock exhaust.
This kit made 418whp and 268 torque @13.6 psi with a 3" exhaust merged into dual 2.5" and custom intake manifold.It made 350 whp at around 9 psi.
Here's some specs/whats included:
Precision 5865 Ball bearing turbo V band Ceramic coated and custom heat sheild
LHT Log manifold ceramic coated
LHT 3" stainless down pipe with flex connector ceramic coated 2 o2 bungs
TIAL MVS wates gate
TIAL Q BOV ( Behind bumper)
LHT Custom intake SOLD
Precision intercooler as1025 anodised black with bolt on mounts
Aluminum intercooler piping, 2.5" powder coated bright silver blk connectors T bolts bung for intake temp and 1/8" bung for meth
-3 stainless feed with sandwich adaper
-12 stainless drain
4" intake and K+N Filter
Rack spacers, allow much cleaner pipe routing ( See pics) and better steering feel
Bracket and hose for coolant relocate
Fuse box reloation braket
The factory oil filter does fit, I run an oil cooler.
Here's some pics.
$4700 Shipped.UPS only.
09-07-2010, 04:31 AM
#3
Registered User
Join Date: Jun 2004
Location: Sun★Works
Posts: 16,759
Likes: 0
Received 0 Likes
on
0 Posts
super clean setup.....I have sat in this car with the kit installed....sounds and feels great....
buy with confidence...
this is a great, self-contained forced induction solution.
buy with confidence...
this is a great, self-contained forced induction solution.
