FS: Fully Built Alaniz Motor
#1
Registered User
Thread Starter
Join Date: Aug 2002
Location: Orlando, Florida
Posts: 2,554
Likes: 0
Received 0 Likes
on
0 Posts
FS: Fully Built Alaniz Motor
It is time to part with this motor - It has been stored since my accident and the motor was not damaged in any way and only had approx. 3000 easy tuned miles running pig rich, I REALLY want to sell this locally as I do not want to ship and risk damaging this motor.
I waited over 7 months for this motor and never got to enjoy it's potential.
Here is the original thread of my experience!
https://www.s2ki.com/forums/index.php?showt...0&#entry5849065
Here is the info from Alaniztechnologies.com Joe does not offer these services anymore. The motor will be fully inspected locally at Fourniers automotive performance shop before it is sold and they can do the install if you desire.
I also have the Proflow TB and port matched Intake Manifold, AC, alternator etc...if someone would be interested in those as well.
I am entertaining offers around $5000.00
FROM Joe's Website:
"HIGH Boost Engine Package" starting at $6700.00 (8-10 week down time)
LABOR/PARTS INCLUDED
*
Big Bore up to 89mm. Brings displacement up to 2090cc.
*
Replace with high strength ductile iron sleeves.
*
ARIAS Forged pistons 9.8:1CR
*
Rings for high boost made in USA.
*
Rods (Cunningham rods made to our specifications)
*
New oil pump
*
Street Master head work (bowl work and chambers only)
*
Titanium retainers
*
New bronze valve guides (intake and exhaust)
*
Competition inner springs with locators
*
.5mm stainless steel oversize valves on intake, 1mm on exhaust
*
New Gaskets and seals (long block only)
*
Balance engine
*
Blueprint block to ALANIZ race specifications.
This package is intended for boost applications. A good piece of mind "bullet proof block"
Expert engine tuning is a must.
I waited over 7 months for this motor and never got to enjoy it's potential.
Here is the original thread of my experience!
https://www.s2ki.com/forums/index.php?showt...0&#entry5849065
Here is the info from Alaniztechnologies.com Joe does not offer these services anymore. The motor will be fully inspected locally at Fourniers automotive performance shop before it is sold and they can do the install if you desire.
I also have the Proflow TB and port matched Intake Manifold, AC, alternator etc...if someone would be interested in those as well.
I am entertaining offers around $5000.00
FROM Joe's Website:
"HIGH Boost Engine Package" starting at $6700.00 (8-10 week down time)
LABOR/PARTS INCLUDED
*
Big Bore up to 89mm. Brings displacement up to 2090cc.
*
Replace with high strength ductile iron sleeves.
*
ARIAS Forged pistons 9.8:1CR
*
Rings for high boost made in USA.
*
Rods (Cunningham rods made to our specifications)
*
New oil pump
*
Street Master head work (bowl work and chambers only)
*
Titanium retainers
*
New bronze valve guides (intake and exhaust)
*
Competition inner springs with locators
*
.5mm stainless steel oversize valves on intake, 1mm on exhaust
*
New Gaskets and seals (long block only)
*
Balance engine
*
Blueprint block to ALANIZ race specifications.
This package is intended for boost applications. A good piece of mind "bullet proof block"
Expert engine tuning is a must.
#2
Registered User
Join Date: Jun 2004
Location: Sun★Works
Posts: 16,759
Likes: 0
Received 0 Likes
on
0 Posts
This is a full top and bottom motor, right?? ready for swap?
if so, good price on a fully built and printed motor!!!
try pricing an OEM full motor from honda and see where you end up.
A really good deal for somebody looking to go high boost from the get go!!!
if so, good price on a fully built and printed motor!!!
try pricing an OEM full motor from honda and see where you end up.
A really good deal for somebody looking to go high boost from the get go!!!
#6
Registered User
Thread Starter
Join Date: Aug 2002
Location: Orlando, Florida
Posts: 2,554
Likes: 0
Received 0 Likes
on
0 Posts
My hopes of another S2k have dwindled as I need to invest in real estate and I don't want the motor sitting anymore - it needs a good home
#7
Year
Make/Model/Description
Warranty
Part Condition
Stock#
Our Price
2000 Honda S2000 Engine, Good Condition - Used U9600HS2001 $3,750.00
2003 Honda S2000 Engine , Good Condition - Used U9603HS2002 $3,665.63
2002 Honda S2000 Engine, Good Condition - Used U9602HS2003 $3,375.12
2003 Honda S2000 Engine, Good Condition - Used U9603HS2004 $3,375.12
2001 Honda S2000 Engine, Good Condition - Used U9601HS2005 $3,375.00
These are the typical online prices for used S2K engines of unknown mileage and origin from a couple of online engine sources.
This sale is a steal of a deal to someone with serious power and reliability wants/needs.
Make/Model/Description
Warranty
Part Condition
Stock#
Our Price
2000 Honda S2000 Engine, Good Condition - Used U9600HS2001 $3,750.00
2003 Honda S2000 Engine , Good Condition - Used U9603HS2002 $3,665.63
2002 Honda S2000 Engine, Good Condition - Used U9602HS2003 $3,375.12
2003 Honda S2000 Engine, Good Condition - Used U9603HS2004 $3,375.12
2001 Honda S2000 Engine, Good Condition - Used U9601HS2005 $3,375.00
These are the typical online prices for used S2K engines of unknown mileage and origin from a couple of online engine sources.
This sale is a steal of a deal to someone with serious power and reliability wants/needs.
Trending Topics
#10
Registered User
Thread Starter
Join Date: Aug 2002
Location: Orlando, Florida
Posts: 2,554
Likes: 0
Received 0 Likes
on
0 Posts
I honestly couldn't tell you if it was moly coated or not. I suppose only Joe Alaniz knows, It didn't say it on the website and I do not know if that is normal in a full build like this!