SweetJ is Dead
from my fav 
s
What happened?
Trending Topics
08-11-2006 | 06:55 AM
#8
Member
Joined: Apr 2004
Posts: 82,365
Likes: 1,151
Originally Posted by sweetj,Aug 11 2006, 10:49 AM
Thanks RC... SC would be nice but I'll probably need a long block, complete head and block. Not too sure I want to go with rebuilt at this point...
"HIGH Boost?Engine Package Alainz fully built motor, I waited 7 months for this motor and it is available now! Less than 3000 easy miles on this engine - I am still on the break in tune pig rich at 11.5 A/F Never been rung out and never once did I do a clutch drop - I babied the drivetrain!!!!
Big Bore up to 89mm. Brings displacement up to?2090cc.
Replace with high strength ductile iron sleeves.
ARIAS Forged pistons 9.8:1CR
Rings for high boost made in USA.
Rods (Cunningham rods made to our specifications)
New oil pump
Street Master head work (bowl work and chambers only)
Titanium retainers
New bronze valve guides (intake and exhaust)
Competition inner springs with locators
.5mm stainless steel oversize valves on intake, 1mm on exhaust
New Gaskets and seals (long block only)
Balance engine
Blueprint block to ALANIZ race specifications.
Big Bore up to 89mm. Brings displacement up to?2090cc.
Replace with high strength ductile iron sleeves.
ARIAS Forged pistons 9.8:1CR
Rings for high boost made in USA.
Rods (Cunningham rods made to our specifications)
New oil pump
Street Master head work (bowl work and chambers only)
Titanium retainers
New bronze valve guides (intake and exhaust)
Competition inner springs with locators
.5mm stainless steel oversize valves on intake, 1mm on exhaust
New Gaskets and seals (long block only)
Balance engine
Blueprint block to ALANIZ race specifications.
