Mark this thread as Sold
2008 Apex Blue s2000 CR - Oregon
The following users liked this post:
pastoli (10-09-2021)
10-25-2013, 09:31 PM
#13
Moderator
Thread Starter
Lol David! 
Thanks Tuan!
I've had a lot of people asking for more detailed photos of the engine bay, wheels, seats and interior so here they are. I finally had time to uncover the car and charge the battery to get the car out in natural light. All pretty straightforward.
Like I said; the wheels aren't perfect but they are clean. There is curb rash one the passenger rear wheel
I try to keep the engine clean, no oil seepage
Seats are clean, no real wear. The yellow is clean, I did wipe them off so the seat cushion looks a little dis colored due to the moisture of the rag.
The z1 star specs still have a lot of life left. There are roughly 9-10k miles on them.
Some interior shots
Lastly is the engine bay. I had a J's Racing Tsuchinoku intake (which did require cutting some of the OEM hood as is required with that intake)
I did upgrade the suspension to KWv3 coilovers for a short while a couple years ago but they didn't give me that same feeling as with the CR suspension. I actually purchased CR suspension that only had 16,xxx miles on them so they have about 1/3 the mileage on them than the chassis does.
Thanks Tuan!I've had a lot of people asking for more detailed photos of the engine bay, wheels, seats and interior so here they are. I finally had time to uncover the car and charge the battery to get the car out in natural light. All pretty straightforward.
Like I said; the wheels aren't perfect but they are clean. There is curb rash one the passenger rear wheel
I try to keep the engine clean, no oil seepage
Seats are clean, no real wear. The yellow is clean, I did wipe them off so the seat cushion looks a little dis colored due to the moisture of the rag.
The z1 star specs still have a lot of life left. There are roughly 9-10k miles on them.
Some interior shots
Lastly is the engine bay. I had a J's Racing Tsuchinoku intake (which did require cutting some of the OEM hood as is required with that intake)
I did upgrade the suspension to KWv3 coilovers for a short while a couple years ago but they didn't give me that same feeling as with the CR suspension. I actually purchased CR suspension that only had 16,xxx miles on them so they have about 1/3 the mileage on them than the chassis does.
11-03-2013, 03:51 PM
#15
Moderator
Thread Starter
A "coolness" factor to this car which I can finally announce was that my car was modeled for the new Forza 5 game coming out. Whoever ends up with this special car, it will be the exact car that's in the new video game! Xbox contacted me in late 2012 and subsequently came down to Portland in January 2013 for a 3D modeling of the CR.
The game is using a "Delete" model, so we went over all the differences between the two.
As always, I'm open to offers
-Ira
http://www.forzamotorsport.net/en-US...ort_5_Showroom
The game is using a "Delete" model, so we went over all the differences between the two.
As always, I'm open to offers
-Ira
http://www.forzamotorsport.net/en-US...ort_5_Showroom
keep it buddy!
