Carolinas A Better Place to Be

i think something is wrong

Thread Tools
 
Old 10-15-2007 | 01:16 PM
  #1  
s2kon's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 92
Likes: 0
From: B-Tyne
Arrow i think something is wrong

whats up guys i need some input from u guys that have had your s for a while now. ok well i picked up an s about a week ago used 03 with 23k on it i think something is wrong with my tranny/clutch

symptoms: gears, it is really hard for me to get into first on a stop and third is also very knotty, the other thing is lets say im driving real slow or im in reverse when i come to a complete stop in gear i get a bad tremble from somewhere.
Old 10-15-2007 | 03:45 PM
  #2  
MULDER's Avatar
Community Organizer
 
Joined: Jul 2004
Posts: 11,936
Likes: 11
From: Charleston
Default

Welcome to the Carolinas and S2ki.


First thing I would do is change the tranny fluid to the new synthetic mixed Honda MTF (lime green label). If that didn't ease the harshness of the tranny it may be a larger issue.

The tremble is because you aren't carrying enough revs. Remember, the S2000 isn't a lazy Chevy, you have to keep her revs up. You will learn the 3-3.5k rpms is its sweet spot, and letting the engine go lower than that will cause it to bog, shutter, and at worse.... stall.
Old 10-15-2007 | 04:05 PM
  #3  
my2ks2k's Avatar
Registered User
 
Joined: Oct 2005
Posts: 4,057
Likes: 0
From: nc
Default

any manual transmission vehicle = yeah you're gonna get some tremble if you come to a complete stop in gear
Old 10-15-2007 | 05:08 PM
  #4  
s2kon's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 92
Likes: 0
From: B-Tyne
Default

Originally Posted by MULDER,Oct 15 2007, 03:45 PM
The tremble is because you aren't carrying enough revs. Remember, the S2000 isn't a lazy Chevy, you have to keep her revs up. You will learn the 3-3.5k rpms is its sweet spot, and letting the engine go lower than that will cause it to bog, shutter, and at worse.... stall.
i am driving it at around those rpms but its when i come to a complete stop its like a tremble/ rattle sound. i have owned a few hondas and i havent heard this noise before. also its only in first and in reverse. thanks for the welcome
Old 10-15-2007 | 05:10 PM
  #5  
GyozA's Avatar
 
Joined: Sep 2006
Posts: 1,509
Likes: 2
Default

Map sensor issues?
Old 10-15-2007 | 05:45 PM
  #6  
MULDER's Avatar
Community Organizer
 
Joined: Jul 2004
Posts: 11,936
Likes: 11
From: Charleston
Default

Do your RPMs dip when the tremble and rattle happens?
Old 10-15-2007 | 08:04 PM
  #7  
whitemistress2k's Avatar
Registered User
 
Joined: Mar 2006
Posts: 2,928
Likes: 0
From: Asheboro, NC
Default

That's low miles to have these issues
Try changing your tranny fluid first as Mulder mentioned... might as well do the diff fluid too... Use good stuff though, don't skimp and see what happens then.

Where you located at??
Old 10-16-2007 | 07:15 AM
  #8  
s2kon's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 92
Likes: 0
From: B-Tyne
Default

Originally Posted by MULDER,Oct 15 2007, 05:45 PM
Do your RPMs dip when the tremble and rattle happens?
no
Old 10-16-2007 | 07:44 AM
  #9  
MULDER's Avatar
Community Organizer
 
Joined: Jul 2004
Posts: 11,936
Likes: 11
From: Charleston
Default

Hmmm.... Its probably time for Bryan to step in. Abnormal vibration in the drivetrane... You didn't buy this car from a kid or mom and pop car dealer did you?
Old 10-16-2007 | 09:24 AM
  #10  
s2kon's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 92
Likes: 0
From: B-Tyne
Default

Originally Posted by MULDER,Oct 16 2007, 07:44 AM
Hmmm.... Its probably time for Bryan to step in. Abnormal vibration in the drivetrane... You didn't buy this car from a kid or mom and pop car dealer did you?
no i bought it from a jeep and dodge dealer the owner who had it was a male that barely drove it the only thing the guy did to it was drop a k&n intake that i plan on replacing soon, but the car drives great except for that. btw i just dropped it off to get it checked out ill keep you posted on what they tell me.


Quick Reply: i think something is wrong



All times are GMT -8. The time now is 08:37 PM.