Anyone know of anyone that's good, and how much they charge?

 

Have you tried the freeze the panel and then warm up quick with a 2000w hair dryer?

It doe's work, I am not taking the mick (for a change)

You will need NOS or similar to get the panel down to -30 deg then I use a paint stripper gun at 12".

 

erm....Lloyd. Is this another one of your hair brained schemes?

 

err.. no!! (like kids this)


No honest to god it works.

Lets do some searching, there is a thread on here with a video about it.

 

Ok I got it wrong way round, hot first then freeze.

Loads of clips about it, see here:

http://uk.youtube.com/watch?v=q0UAUB...eature=related

I am sure a few on here have done it.

 

 

pm sent

 

i've had this on a big dent and the result was no better than poor

i think on small dents it's more feasible

 

Website - www.mydent.co.uk
Address - DENTEX Paintless Dent Removal.
Unit 2 Baddesley Park Ind Est ,
Botley Rd. North Baddesley ,
Southampton ,
Hampshire ,
SO52 9NW

Telephone - 02380 733338

http://www.detailingworld.co.uk/forum/show...thampton+neil_s

 

mzm - have you tried these guys?

I suspect the link is to your car, but I have to register for the site.