Mugen V8 engine
#1
Moderator
Thread Starter
Mugen V8 engine
Does anyone watch the show Suits on the USA network? This past weeks episode "Inside Track" was about an F1 company. Towards the end of the episode, there looked to be a V8 engine with a familiar logo. They flashed it a few times but it looked to be the MF408S (only had the Mugen Logo without Mugen Power).
Found it interesting and thought I'd share!
Found it interesting and thought I'd share!
#4
Saw it on the show and saw the badge. First thing I said was "Mugen?!"
Oh and the orange vehicle shown by GateCrasher is the last gen Mugen RL, not an Accord. If my Accord COULD look that way, it would already look that way Damned slowing Honda Accord aftermarket.
Oh and the orange vehicle shown by GateCrasher is the last gen Mugen RL, not an Accord. If my Accord COULD look that way, it would already look that way Damned slowing Honda Accord aftermarket.
#7
Registered User
It's a 4.0L V8 motor. The Mugen Legend Max M1 (Acura RL) has a supposedly detuned 590-hp version of the MF408S? No idea what the HP-figure is in race trim. Its predecessor, the 3.0L V8 MF308 was capable of 500-hp and revved to 10,500rpms for Formula3000 and Formula Nippon. Dunno if this revs higher than the 9500rpms listed below. Used in the Mugen/Dome LMP racecars for LeMans. It was also in a Panoz LMP racer for ALMS driven by Milka Duno
Mugen MF408S Specifications Layout: 90° V8, normally aspirated
Displacement: 4000 cc
Valve configuration: 32 valves, DOHC
Horsepower: 590+ hp @ 9500 rpm
Torque: 383 lb-ft. @ 7500 rpm
Restrictor: 33.4mm(2) or 46.8mm(1)
Clutch: Carbon, 5.5", 4-plate
Length: 559 mm (not including fly wheel)
Width: 720 mm
Height: 577 mm
Crank height: 92 mm
Weight: 131 Kg
Mugen MF408S Specifications Layout: 90° V8, normally aspirated
Displacement: 4000 cc
Valve configuration: 32 valves, DOHC
Horsepower: 590+ hp @ 9500 rpm
Torque: 383 lb-ft. @ 7500 rpm
Restrictor: 33.4mm(2) or 46.8mm(1)
Clutch: Carbon, 5.5", 4-plate
Length: 559 mm (not including fly wheel)
Width: 720 mm
Height: 577 mm
Crank height: 92 mm
Weight: 131 Kg
Trending Topics
#9
Moderator
Thread Starter
#10
you mean HONDA LEGEND...