SoCal Local For Sale / Trade
07-13-2005, 10:11 PM
#991
Registered User
Join Date: Nov 2004
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Selling a new and unused Stack ST8130 dash display I was going to put in my '01 S2000 but opted not to because I'm already orchestrating enough upgrade projects in my car. This is a complete display and sensor/gauge solution for track/race or hard driving S2000, and it makes for a clean interior without the clutter of other pillar/interior mounted gauges. It has the all business look of displays often seen in WRC cars. All gauges and sensors are mil spec, that's as good as it comes. It replaces or requires relocation of the stock display. You'll be in exclusive company with this item in your car
Includes:
Black 10,500 RPM tachometer (More than enough for any S2000 I've seen)
Wheel speed sensor
Water Temperature sensor
Oil Temperature sensor
Oil Pressure sensor
Battery voltage
Lap time read out
Programmable alarms
Peak value recall
Odometer & Tripmeter (Features that make it functional for a street application)
Added an underhood air temperature sensor
Added panel shift light
Also bought a 12' wire bundle from VTEC Frog ($150) to be used for relocating the stock cluster anywhere in the car/trunk
Asking $1,500 (Paid $1,800 for the entire system and extra parts), PayPal payment preferred.
Pics included below, sorry about the poor quality, used my camera phone
Post/PM ?s you may have about the unit, installation, ect.
You can find more complete info about the Stack ST8130 dash display here
Includes:
Black 10,500 RPM tachometer (More than enough for any S2000 I've seen)
Wheel speed sensor
Water Temperature sensor
Oil Temperature sensor
Oil Pressure sensor
Battery voltage
Lap time read out
Programmable alarms
Peak value recall
Odometer & Tripmeter (Features that make it functional for a street application)
Added an underhood air temperature sensor
Added panel shift light
Also bought a 12' wire bundle from VTEC Frog ($150) to be used for relocating the stock cluster anywhere in the car/trunk
Asking $1,500 (Paid $1,800 for the entire system and extra parts), PayPal payment preferred.
Pics included below, sorry about the poor quality, used my camera phone
Post/PM ?s you may have about the unit, installation, ect.
You can find more complete info about the Stack ST8130 dash display here
07-14-2005, 07:57 AM
#993
Registered User
Join Date: Apr 2005
Location: Los Angeles, CA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
dreamcation,
Please add
FS: 2 Seat brackets (driver and passenger side) for recaro, sparco or bride BUCKET seats. very lightly used and clean. bought them from duc @ spugen. they are recaro brackets/sliders with a sparco sidemount. asking 300 OBO for the pair. these are ready to go and off the car.
Please add
FS: 2 Seat brackets (driver and passenger side) for recaro, sparco or bride BUCKET seats. very lightly used and clean. bought them from duc @ spugen. they are recaro brackets/sliders with a sparco sidemount. asking 300 OBO for the pair. these are ready to go and off the car.
07-14-2005, 08:05 AM
#994
Registered User
Thread Starter
07-14-2005, 08:09 AM
#995
Registered User
Thread Starter
S2000_IAN
1. FS: $200 Comptech CAI for sale. I've put a 1,000 miles on it.
Page 40 PICS
BRABUS E430
1. FS Set of Brand new YOKOHAMA ES100.
Fronts are 235-45-17
Rears are 245-45-17.
These go for $117 each on tirerack.com, plus shipping
Brand New asking $375 FIRM
email me - andydisa@hotmail.com
Page 28
2. FS: $300 OBO 2 Seat brackets (driver and passenger side) for recaro, sparco or bride BUCKET seats.
Page 40
Updated
1. FS: $200 Comptech CAI for sale. I've put a 1,000 miles on it.
Page 40 PICS
BRABUS E430
1. FS Set of Brand new YOKOHAMA ES100.
Fronts are 235-45-17
Rears are 245-45-17.
These go for $117 each on tirerack.com, plus shipping
Brand New asking $375 FIRM
email me - andydisa@hotmail.com
Page 28
2. FS: $300 OBO 2 Seat brackets (driver and passenger side) for recaro, sparco or bride BUCKET seats.
Page 40
Updated
07-14-2005, 08:13 AM
#996
Registered User
Join Date: Nov 2004
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Updated prices, I wanna get rid of these parts. 08/01/2005
$50 Stock rods
$50 Stock pistons
$50 Stock LSD
$20 Stock final gear
$200obo for my stock rods/pistons (2001 AP1). They're in great condition with less than 10,000 miles on them. I have an Alaniz built long block for a forced induction application, so there go the stock internals. Pics below, my undestanding is that the coloration on the top of the pistons is normal.
$75obo for stock final gear (4.10) which I replaced with a Ricks 4.77, has only 5,000 miles of use.
$150obo for stock LSD which I replaced with a Cusco 1.5 RS, has only 7,000 miles of use. (No pic sorry)
$50 Stock rods
$50 Stock pistons
$50 Stock LSD
$20 Stock final gear
$200obo for my stock rods/pistons (2001 AP1). They're in great condition with less than 10,000 miles on them. I have an Alaniz built long block for a forced induction application, so there go the stock internals. Pics below, my undestanding is that the coloration on the top of the pistons is normal.
$75obo for stock final gear (4.10) which I replaced with a Ricks 4.77, has only 5,000 miles of use.
$150obo for stock LSD which I replaced with a Cusco 1.5 RS, has only 7,000 miles of use. (No pic sorry)
07-14-2005, 08:24 AM
#997
Registered User
Thread Starter
yellowknockers
1. FS: $200obo for my stock rods/pistons (2001 AP1).
2. FS: $75obo for stock final gear (4.10) which I replaced with a Ricks 4.77, has only 5,000 miles of use.
3. FS: $150obo for stock LSD which I replaced with a Cusco 1.5 RS, has only 7,000 miles of use.
4. FS: $1,500 Stack ST8130 dash display
Black 10,500 RPM tachometer (More than enough for any S2000 I've seen)
Wheel speed sensor
Water Temperature sensor
Oil Temperature sensor
Oil Pressure sensor
Battery voltage
Lap time read out
Programmable alarms
Peak value recall
Odometer & Tripmeter (Features that make it functional for a street application)
Added an underhood air temperature sensor
Added panel shift light
Also bought a 12' wire bundle from VTEC Frog ($150) to be used for relocating the stock cluster anywhere in the car/trunk
Page 40 PICS
Updated and thanks
1. FS: $200obo for my stock rods/pistons (2001 AP1).
2. FS: $75obo for stock final gear (4.10) which I replaced with a Ricks 4.77, has only 5,000 miles of use.
3. FS: $150obo for stock LSD which I replaced with a Cusco 1.5 RS, has only 7,000 miles of use.
4. FS: $1,500 Stack ST8130 dash display
Black 10,500 RPM tachometer (More than enough for any S2000 I've seen)
Wheel speed sensor
Water Temperature sensor
Oil Temperature sensor
Oil Pressure sensor
Battery voltage
Lap time read out
Programmable alarms
Peak value recall
Odometer & Tripmeter (Features that make it functional for a street application)
Added an underhood air temperature sensor
Added panel shift light
Also bought a 12' wire bundle from VTEC Frog ($150) to be used for relocating the stock cluster anywhere in the car/trunk
Page 40 PICS
Updated and thanks
