reputable shop for tranny?
#1
reputable shop for tranny?
im having problems with my clutch not disengaging fully. i cant pull my shifter out of gears at time even with the clutch depressed all the way. another thing is my clutch is feeling super sticky. i've had problems before when they would get a bit sticky, but now it's like 10 times worse! im in the cerritos/long beach area and would like to have this professionally looked at.
below is what i pm'd xviper about my problems;
xviper,
im still having problems with my new clutch setup not disengaging. i've bled the system many times using the directions you provided under the faq thread. it's really annoying because it happens randomly . usually when it happens is when im slowing down (anywhere in 2-4th gear) in city traffic and slow hwy driving. example. (ie) i would cruise in 3rd around 35-40 mph and when i let my foot off the throttle, clutch pressed down all the way, and try to downshift to second at around 15-20 mph, the shifter wont come out of third easily. there's resistance and it'll come out when my car is almost at a stop. i've pulled it out of 3rd gear one time when it was resisting and there was a clunking noise. i cant duplicate it and make it happen whenever i want. also the level of resistance varies. can it be the slave cylinder going bad? i was so excited to get my new clutch setup in but now im frustrated that im having problems . if you have any info or suggestions please let me know. im willing to try anything to solve this problem.
jason
below is what i pm'd xviper about my problems;
xviper,
im still having problems with my new clutch setup not disengaging. i've bled the system many times using the directions you provided under the faq thread. it's really annoying because it happens randomly . usually when it happens is when im slowing down (anywhere in 2-4th gear) in city traffic and slow hwy driving. example. (ie) i would cruise in 3rd around 35-40 mph and when i let my foot off the throttle, clutch pressed down all the way, and try to downshift to second at around 15-20 mph, the shifter wont come out of third easily. there's resistance and it'll come out when my car is almost at a stop. i've pulled it out of 3rd gear one time when it was resisting and there was a clunking noise. i cant duplicate it and make it happen whenever i want. also the level of resistance varies. can it be the slave cylinder going bad? i was so excited to get my new clutch setup in but now im frustrated that im having problems . if you have any info or suggestions please let me know. im willing to try anything to solve this problem.
jason
Thread
Thread Starter
Forum
Replies
Last Post