Need to get fenders rolled in OC...
#1
Registered User
Thread Starter
Join Date: Mar 2004
Location: Corona
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
Need to get fenders rolled in OC...
I live in the most western part of Corona, does anyone know of any GOOD places where i could go to get my fenders rolled in OC (Yorba Linda, Anaheim, city of Orange)? I might need to do this pretty soon if i can't get the rims i want in a "close to stock" offset.
#5
Registered User
Join Date: Jan 2003
Location: Irvine / CA
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AHHVTEC,May 9 2005, 08:16 AM
Yeap paint will peel and crack...
on the other side of this... if you cut/grind down your fenders, rust will form along the areas of exposed metal... unless of course you recoat those areas with paint.
#6
Registered User
Join Date: Jul 2004
Location: San Diego, Wess-Side!!
Posts: 8,796
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by GideonP,May 9 2005, 08:53 AM
on the other side of this... if you cut/grind down your fenders, rust will form along the areas of exposed metal... unless of course you recoat those areas with paint.
Jon,
If your reading this.......you better start painting....
#7
Originally Posted by GideonP,May 9 2005, 04:53 PM
... if done carelessly... my fenders were rolled but a heat gun was used to soften the paint just enough to prevent any cracking.
on the other side of this... if you cut/grind down your fenders, rust will form along the areas of exposed metal... unless of course you recoat those areas with paint.
on the other side of this... if you cut/grind down your fenders, rust will form along the areas of exposed metal... unless of course you recoat those areas with paint.
Trending Topics
#8
Registered User
Join Date: Jan 2003
Location: Irvine / CA
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AHHVTEC,May 9 2005, 01:12 PM
Had mine shaved for over two years. No issues yet though...
I've also seen hack jobs done by other people where rust did become an issue. Call me a pansy but if I were to get my fenders shaved, I would recoat the bare surfaces.
To answer the original post... if you want to get your fenders shaved (or anything else S2k related), go to Spugen in Whittier.
If you want to get them rolled, I've had good luck with Super Autobacs.
#9
Originally Posted by GideonP,May 9 2005, 08:26 PM
I've seen one of the cars whose fenders you've shaved. Very clean job!
I've also seen hack jobs done by other people where rust did become an issue. Call me a pansy but if I were to get my fenders shaved, I would recoat the bare surfaces.
To answer the original post... if you want to get your fenders shaved (or anything else S2k related), go to Spugen in Whittier.
If you want to get them rolled, I've had good luck with Super Autobacs.
I've also seen hack jobs done by other people where rust did become an issue. Call me a pansy but if I were to get my fenders shaved, I would recoat the bare surfaces.
To answer the original post... if you want to get your fenders shaved (or anything else S2k related), go to Spugen in Whittier.
If you want to get them rolled, I've had good luck with Super Autobacs.
Duc