kn106518

I just have to know whose car is this? and where did you get that lip from?
http://fearrange.smugmug.com/Cars/EO...IMG_0004-M.jpg

Sterling Sackey

It's an APR lip. I sell them if you're interested

jib2222

Edited: Apr 28, I'll be there

Cargo

Just one week away.

EnVme

i'll be there!!!

NaturalAspirations

Hey there all you EOM guys and gals that are S2 owners just a little bit of tech info for you. With all the corner balancing that ive been doing lately I was curious to see if after corner balancing a s2k if adding a passenger would throw off the weight distribution seeing as my dad and I roll out together for these runs. Due to the placement of the seats in the s2 I had corner balanced a customers ap1 where his weight equaled 225lbs and set up the coilovers back to the s2's trademark 50/50 cross weight then proceeded to have my dad sit in the passenger seat thus adding a extra 170lbs to the passenger side and overall total weight of the car and the added weight had no effect on the balance of the vehicle at all. Long story short all u s2 owners out there who have passengers with you the vehicles balance will not be effected. Just thought I share.

Cargo

I know you're looking for S2K owners, but I couldn't really tell to much if any difference with or without a passenger after having my DC2 corner balanced.
How ever getting the car corner balanced made a world of difference.

kn106518

Nice I'll keep that in mind, when I do corner balance I'll make sure to add 150lbs on the passenger side just in case. Anywho, I'll be at the drive on the 28. It's be my first time.

NaturalAspirations

Cargo. if you have time to come by the BBQ on the 4th Id be interested to see how the weight is distributed on a dc2 chassis with and without passenger weight. My findings so far are only with the s2k only cause i was board and checked it while i was working. Looking into other chassis types would be fun and a great wealth of knowledge but thats just my inner nerd talking. lol


kn106518, if its a sk2 u need balanced driver weight is all i need and at least a 1/2 tank of fuel.

Sebring AP1

Drive weight has little/no effect on crossweight if you corner balance. So weight in the driver/passenger seat is pretty much negligible. Proven on the board and I've done so myself as well.