lewiS2K

im running 9.5 and +40 in the back.. i have roll and slight pull/flare, and i only rub the bumper.. my tires are actually wearing down the bumper so soon it shouldn't rub at all...

make sure it's not rubbing the actual fender and you should be ok.. if it is.. run smaller tires and some negative camber and you should be fine

lewiS2K

im sorry i didnt' read your second post, it's most likely your rubbing bumper tab.. run negative camber.. 1.5-2.0 should be fine

s9k

I should've never gotten the Firestone lifetime alignment thing... they only would do alignment according to stock... any one knows if this is not true?

i</3speedbumps.

its your bumper bolt. relocate it. i had the same problem when i was running a 17x9 +35 set up.

theonlineguy

its most likely your rear bumper tab on the rear, have your bumpertab done. you should be fine

i have done camber/ roll & pull twice/ relocated twice bumper tab

finally no more rubbing

s9k

hhmmm, checked out the car at first, I think you guys are right about the bumper tab, seems to have a lot of "rubbing residue" around that area...