View Poll Results: Which cat should I use? I have an AP2 with AP1 Comptech header/exhaust.
Voters: 6. You may not vote on this poll
What is the width of the Comptech Exhaust/Header?
#21
Thread Starter
Join Date: Jul 2009
Location: Professor Touge Emeritus
Posts: 8,570
Likes: 0
Received 9 Likes
on
8 Posts
Originally Posted by eklipz98' timestamp='1317009615' post='21005678
[quote name='05APdeuce' timestamp='1317009449' post='21005670']
The comptech header and exhaust is 63 mm
The comptech header and exhaust is 63 mm
Based on what I've heard, the 3" Asura is likely "too large" (3" = 76.2mm).
If I can return the Asura, I'm going to go for the Berk 63.5mm!
Here is tha article on the exhaust Stating that it is 63mm http://www.importtuner.com/powerpage...000/index.html
Here is the "official Header Thread where they show that the Comptech Header collecter is 63mm.
https://www.s2ki.com/s2000/topic/634...header-thread/
[/quote]
This is golden information. Thank you so much. I really appreciate it!
This morning, I also got confirmation from CT Engineering:
The inlet on our exhaust is 2.5" (63.5mm). I would recommend using a cat with as close to the same size as possible so you don't have a restriction.
#22
Former Moderator
Here's the info from gernby about pipe sizing.
https://www.s2ki.com/s2000/topic/839...gernby+exhaust
https://www.s2ki.com/s2000/topic/839...gernby+exhaust
#23
Piping should always be in equal or ascending order (all numbers are in mm's):
63 -> 63 -> 63
63 -> 63 -> 70
63 -> 70 -> 70
63 -> 70 -> 75/76
63 -> 75/76 -> 75/76
Shouldn't be done any other way
63 -> 63 -> 63
63 -> 63 -> 70
63 -> 70 -> 70
63 -> 70 -> 75/76
63 -> 75/76 -> 75/76
Shouldn't be done any other way
#26
What piping is the comptech? 70mm? Get whatever matches the comptech (before the split). All the scavenging is done at the collector so you want the largest piping after that.
#27
Thread Starter
Join Date: Jul 2009
Location: Professor Touge Emeritus
Posts: 8,570
Likes: 0
Received 9 Likes
on
8 Posts
Here is tha article on the exhaust Stating that it is 63mm
http://www.importtuner.com/powerpage...000/index.html
Here is the "official Header Thread where they show that the Comptech Header collecter is 63mm. https://www.s2ki.com/s2000/topic/634...header-thread/
http://www.importtuner.com/powerpage...000/index.html
Here is the "official Header Thread where they show that the Comptech Header collecter is 63mm. https://www.s2ki.com/s2000/topic/634...header-thread/