camshaft question
#1
camshaft question
so i bent a valve on my head, and stevens creek honda service dept. says i need a whole new head because the valve tube broke and can't be repaired. ok, so i buy a used head from a guy off this forum. now they are telling me that stock cams are custom machined to each head and that buy using the cam from my original head that i would risk blowing the motor. is this true? the service manager told me that this information came directly from honda's tech line. for some reason, i just don't believe this to be true...
#2
Registered User
that doesnt make sense to me. but then again i'm not very mechanically inclined, however i'm still inclined to call coz it sounds like a plot to get you to buy a new head from them
#4
Registered User
Join Date: Feb 2006
Location: San Jose, CA
Posts: 3,627
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tuff luck,May 7 2007, 02:59 PM
stevens creek honda
#5
Join Date: Aug 2001
Location: Bay Area, California
Posts: 17,792
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by tuff luck,May 7 2007, 03:59 PM
so i bent a valve on my head, and stevens creek honda service dept. says i need a whole new head because the valve tube broke and can't be repaired. ok, so i buy a used head from a guy off this forum. now they are telling me that stock cams are custom machined to each head and that buy using the cam from my original head that i would risk blowing the motor. is this true? the service manager told me that this information came directly from honda's tech line. for some reason, i just don't believe this to be true...
I would take my car and out of there.
Trending Topics
#8
Originally Posted by Voodoo_S2K,May 7 2007, 05:42 PM
Total
I would take my car and out of there.
I would take my car and out of there.
its funny because someone i know went there in their s2k. and the salesman didnt even know what kind of car it was.
those dumb motherfu@#$
#9
WOW... that representative is FULL OF CRAP. his lack of integrity and/or confidence is no better than a retarded magician who pulls crap from his ass.
dont waste your time there..
dont waste your time there..
#10
I'm not too sure about F series engines but for B series it's not the cams but the cam caps (not sure if this is the right name) which goes on top of the cam can not be replaced since there are only 1 set for 1 head. I'm not sure if this is what the dealer is talking about.
Thread
Thread Starter
Forum
Replies
Last Post