viNz86 Project Wide Black C_ _ _ PAGE 28 [Magazine article, Life + more]
#313
Registered User
Thread Starter
Thanks all, bot the car on jack stands today. Going to do some fender work to get more clearance just in case.
I ordered tires tonight, can't wait till they arrive! Trying a different rubber this time.
vinny
I was thinking the same thing Chris!
I ordered tires tonight, can't wait till they arrive! Trying a different rubber this time.
vinny
#320
Registered User
Thread Starter
Woot one more day until tires arrive!
Been working on the car since it's on jack stands. Took the good ol dremel and shaved more fibreglass and plastic to maximize clearance. Also did a bit of hammering to bend a piece of metal in the rear wheel where rubbing might occur.
3/5 of the nuts for the project kics spacer seized. I even put copper anti seize and torqued to proper spec. Had to take the control arm off and bring it by the shop where they used air compressor tools to remove. Ain't a tech day without problems.
Pic of my batmobile and batbike
Just an old pic with my friend and I
Updates soon
PS. Any of you guys on instagram? @viNz86_
Been working on the car since it's on jack stands. Took the good ol dremel and shaved more fibreglass and plastic to maximize clearance. Also did a bit of hammering to bend a piece of metal in the rear wheel where rubbing might occur.
3/5 of the nuts for the project kics spacer seized. I even put copper anti seize and torqued to proper spec. Had to take the control arm off and bring it by the shop where they used air compressor tools to remove. Ain't a tech day without problems.
Pic of my batmobile and batbike
Just an old pic with my friend and I
Updates soon
PS. Any of you guys on instagram? @viNz86_