When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Since the wheels were all coated, I went to getting the OEM CR Tonneau installed. Since the brackets have been discontinued forever and I couldnt find any. A buddy of mine made some easy brackets, since he did the samethin for his car. And I was surprised how simple it was, and they worked with no issues and stayed in place. I think I skipped this update. but I never drove with the top down nor did I ever take the top off once I got a hardtop so I removed the OEM softtop and frame and wanted a CR cover.
I removed all those metal clips for the Soft top cover and found some plugs to plug the holes. Looks OEM =D
I plan to find a better condition, rear tray and swap it out.
I was waiting for a few other parts to come in. So decided to take the car off the jacks and clean up the back of the car so I can prepare it for the rear JDM crash bar. At this time I had schedule time for my car to go to paint in a few months.
Also I was able to ASM rear bumper. I was going to order new since everything else was new but it made sense to buy the used one since it was going to paint in a few months. It as super dirty so I wanted to clean it up .
After it was all dry, I installed the JDM crash beam and JDM license bracket. The Crash beam only allows 1 bolt to be used on the end for some weird reason, so I added a rivnut so I can add another M12 bolt. Also the license plate bracket came with rivets, I opted to do rivnuts on this as well just incase I needed to make adjustments.
Its been months since I had all the interior back in the car. There was a longggggg list of things I got done:
ASM Wheel and Hub
ASM Leather shift boot
NSX Shift Knob
Few Modifry goodies
Added speakers in the rear panels
Recaro ABE with PCI sliders and the Andrew Hake seatbelt extender write up.
04-05, leather trim, center console and radio door.
OEM CR cover
OEM Extended floor mats
Got bored again and decided to check the fitment of the ASM rear bumper, I knew it would fit perfect but just wanted to do it haha. Also took some more photos of the interior.
01-05-2024, 08:15 AM
