JustinSour's 05 Berlina BilleD Updated MRacing door mounts
#411
Thread Starter
Little adjustment today. I made my own seatbelt buckle extension for my pole position seat paired with buddyclub seatrail. You will notice that the stock buckle is too big and causes the seat not to slide as freely without it. The problem is that the buckle hits the tunnel. Well ive created this piece so the buckle will sit on the lap and just a strap will be on the side of the rail
The following users liked this post:
2NDW1FE (02-08-2018)
#416
Thread Starter
i bought the sleeve kit off eBay, snap-on air hammer with proper tip and a c clamp press. Everything there had the parts, including some sockets to remove and press the bushings. It takes time, but all new spoon bushings will make a world of a difference on any s2000
#417
Little adjustment today. I made my own seatbelt buckle extension for my pole position seat paired with buddyclub seatrail. You will notice that the stock buckle is too big and causes the seat not to slide as freely without it. The problem is that the buckle hits the tunnel. Well ive created this piece so the buckle will sit on the lap and just a strap will be on the side of the rail