Chris_Lum's Mugen build
#421
Looks absolutely amazing! Quick question, I noticed you have a carbon-fiber ram air scope, did you notice any difference in terms of power and fuel economy? Or do you recommend a cooling plate instead? thank you!
Update 1.09.11
Traded the Turbo Ti-C w/ my buddy's SE single
Update 12.11.10
Bride Stradia Sport Japan arrived and installed + Sold the GReddy SE dual and installed a GReddy turbo TiC w/ Berk HFC.
Update 9.20.10 Decided i wanted to change things up, so i sold my Recaro and ordered a Bride Stradia Sport Japan. Scheduled to arrive in November. Sold my Tein SRC and picked up a set of Mono Flex in order to help fund the expensive seat. I miss the SRC already...take a look at the difference in quality between stock, Mono Flex and SRC (left to right). While the Mono Flex looks similarly built to OE suspension, the SRCs are on an entirely different level. Check it out.
Update 7.31.10 Woke up to a gloomy morning and my car was clean, so it was a perfect time to do a shoot!
__________________________________________________ _________________
Update 7/25/10 Picked up a J's snorkel from a local member for some engine bling and installed non-stagger RE30 17x9 +35, Ti silver
__________________________________________________ _________________
Update 7/7/10 Tamon ducktail finally painted and installed:
__________________________________________________ _________________
Got my car back from Angry Panda Fabrications in Huntington Beach. They do awesome work!! got my ASM bumper and cf 07 lip repaired and painted, a fender resprayed and my trunk holes filled (removed spoiler).
Sold the CR front setup and ap1 spoiler. Have a tamon spoiler on order with Bulletproof.
Before:
After:
Traded the Turbo Ti-C w/ my buddy's SE single
Update 12.11.10
Bride Stradia Sport Japan arrived and installed + Sold the GReddy SE dual and installed a GReddy turbo TiC w/ Berk HFC.
Update 9.20.10 Decided i wanted to change things up, so i sold my Recaro and ordered a Bride Stradia Sport Japan. Scheduled to arrive in November. Sold my Tein SRC and picked up a set of Mono Flex in order to help fund the expensive seat. I miss the SRC already...take a look at the difference in quality between stock, Mono Flex and SRC (left to right). While the Mono Flex looks similarly built to OE suspension, the SRCs are on an entirely different level. Check it out.
Update 7.31.10 Woke up to a gloomy morning and my car was clean, so it was a perfect time to do a shoot!
__________________________________________________ _________________
Update 7/25/10 Picked up a J's snorkel from a local member for some engine bling and installed non-stagger RE30 17x9 +35, Ti silver
__________________________________________________ _________________
Update 7/7/10 Tamon ducktail finally painted and installed:
__________________________________________________ _________________
Got my car back from Angry Panda Fabrications in Huntington Beach. They do awesome work!! got my ASM bumper and cf 07 lip repaired and painted, a fender resprayed and my trunk holes filled (removed spoiler).
Sold the CR front setup and ap1 spoiler. Have a tamon spoiler on order with Bulletproof.
Before:
After:
#422
Thread Starter
no, old set was 17x9 +35 w/ 245 tire and new set is 17x9.5 +40 255 tire
nah didn't notice any power with the snorkel, but can't say that i would recommend a cooling plate either! haha this car is hard to make N/A power (and expensive to do so)
nah didn't notice any power with the snorkel, but can't say that i would recommend a cooling plate either! haha this car is hard to make N/A power (and expensive to do so)
#427
Is that a Modifry bracket inside your car?? What holder are you using on it to hold your phone and etc?? I've been trying to find one that fits on it and cant seem to find one... i think the modifry website was out of the ones that work with it.
#428
Thread Starter
yeah modifry bracket with my own DIY phone holder that i constructed out of aluminum strips. I use velcro to attach the phone holder to the modifry bracket. holds amazingly well.