★ ☆Booztin's Build☆ ★ back from the DEAD 2015 update (s2k, raptor, sti ) pg31
#721
Registered User
Thread Starter
Join Date: Oct 2007
Posts: 1,633
Likes: 0
Received 0 Likes
on
0 Posts
lol the ccw's are starting to grow on me every time I see em. I miss my volks quite a bit but I cant compare to the sizing on the new setup lol
#723
Registered User
Thread Starter
Join Date: Oct 2007
Posts: 1,633
Likes: 0
Received 0 Likes
on
0 Posts
I recently took a trip over to Evans Tuning just to go over some of the build snapped some pix.
Jeff's racecar
some of you might see your s !
I also got a chance to snap some pix of the new turbo for this years setup.
I'll be running a borgwarner s400sx with a 1.10 a/r
I had all the numbers and bumps and such taken off of it before it goes to polishing also had
a vibrant vanjen flange welded on.
This past weekend I had the oppertunity to get out to Formula D NJ had a blast my buddy hooked it up so experienced the day vip with falken tires
Fullblown is currently doing a full head build so here's some shots of the goodies going in
should have quite a bit of updates within these next two weeks!
Jeff's racecar
some of you might see your s !
I also got a chance to snap some pix of the new turbo for this years setup.
I'll be running a borgwarner s400sx with a 1.10 a/r
I had all the numbers and bumps and such taken off of it before it goes to polishing also had
a vibrant vanjen flange welded on.
This past weekend I had the oppertunity to get out to Formula D NJ had a blast my buddy hooked it up so experienced the day vip with falken tires
Fullblown is currently doing a full head build so here's some shots of the goodies going in
should have quite a bit of updates within these next two weeks!
#729
Registered User
Thread Starter
Join Date: Oct 2007
Posts: 1,633
Likes: 0
Received 0 Likes
on
0 Posts
As always thank you guys !
Im going to be going to Import Alliance in Louisville Kentucky July 20th So these next two weeks are gonna be crunch time and I'll be posting pix.
Photos are from Jeff DeVos (minitoyota)at Evans Tuning where the entire motor will be put together.
I received the head back from full blown motorsports they did a full Ferrea Head build.
and im gonna be using the L19/H11 full blown headstuds as they are much stronger and better quality then what arp offers
found a chip on my ACT 6pad sprung clutch so I'll be running Clutchmasters fx400 HDC6 this time around.
#730
This may not mean anything to you, but I'm in the Air Force and currently deployed in Saudi Arabia. We have a small BX here on base that carries the car magazines I usually pick up every month. It's one of those small things that helps raise morale when I'm feeling down about being stuck in this shithole doing a shitty job. I just picked up the issue of Super Street with your car featured on the cover today. Good job, and be proud, you're famous all over the world now