Robbins aftermarket roof problems also
#1
Thread Starter
Join Date: May 2003
Location: Melbourne
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Robbins aftermarket roof problems also
Hi all...
I had a robbins top fitted to a spare frame (which i bought 2nd hand).
I tested the frame before the fitting of the robins top - all was good..
After the top was fitted (by someone who has done a few).. the roof sits approx 1 inch too high when closing.. and the P/S striker doesn't seem to align to well either..
I basically have to hold the roof by the handle (with some force) until the strikers lock into position - then i can close the latches...
I have adjusted the link stops - and they dont seem to fix this problem..
Any ideas?
here are some pics:
I had a robbins top fitted to a spare frame (which i bought 2nd hand).
I tested the frame before the fitting of the robins top - all was good..
After the top was fitted (by someone who has done a few).. the roof sits approx 1 inch too high when closing.. and the P/S striker doesn't seem to align to well either..
I basically have to hold the roof by the handle (with some force) until the strikers lock into position - then i can close the latches...
I have adjusted the link stops - and they dont seem to fix this problem..
Any ideas?
here are some pics:
#3
Thread Starter
Join Date: May 2003
Location: Melbourne
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
i hope so!
does any know how long the breaking in period is (i know with my g/f its been 7 years already - and still not broken in)..
but seriously - i have left it latched for a couple of weeks now.. does anyone know how long it should take - b4 i start to worry (more)..
btw - thanks Aus - you have set my mind at ease!
was throwing mini tantrums last night
does any know how long the breaking in period is (i know with my g/f its been 7 years already - and still not broken in)..
but seriously - i have left it latched for a couple of weeks now.. does anyone know how long it should take - b4 i start to worry (more)..
btw - thanks Aus - you have set my mind at ease!
was throwing mini tantrums last night
#5
Registered User
Join Date: Mar 2006
Location: Melbourne
Posts: 2,642
Likes: 0
Received 0 Likes
on
0 Posts
i had this problem too, does the roof operate up and down normally? If it does then maybe it is due to the canvas being installed too tightly, how tight is the fabric when its in the closed position?
#7
Registered User
Join Date: Mar 2006
Location: Melbourne
Posts: 2,642
Likes: 0
Received 0 Likes
on
0 Posts
Well they fixed up the grounding wires for the motors, now it goes up and down really quickly and closes right up to the frame with no problems at all...
Maybe it has something to do with this second frame your using?
Maybe it has something to do with this second frame your using?