KeithM

simply put, they wont fit. not even close

RogerHinga

i have some in my garage right now.. if you want to try it go for it.. i am 2 lazy

1nate7

You would need to bore out the center of the front wheels. The S2000 front hub bore is 70.7mm and the 350Z wheel bore is 66.1mm. The rear bore is 64.1mm, so the 350Z wheels would fit over that fine. I had a friend custom bore some STi BBS wheels to fit a S2000 though, so it can be done.

Offset wise, it's aggressive but you could make it work if you rolled the fenders and ran a decent amount of negative camber.

USAF-AP2

i want the brembo package off the z's...lol or even off the g35....

ap1lvr

DON'T PUT NISSAN CRAP ON YOUR GOLDEN GOD OF A HONDA!

Zonie

I wouldn't wish the G35 brakes on ANYONE... hate those squeaky things

9KRDLIN

i may take you up on that offer roger... are they the seven spokes? aren't you moving right by me?

phoenixR34

The 350Z rear wheel is not aggressive on an S2000. 17x8 +33mm will fit easily.. 17x9 +33 fits, so an inch narrower will be no problem at all. The front 17s will fit too.

Most of the 18" wheels are 18x8 +30. The older Track model uses an 18x8.5" rear, and an 18x8 +30 front... both should fit fine. That only leaves the new Track model wheel which I believe is a 19x9.5" or 19x9".

The only question is the center bore, otherwise they should all fit fine.

9KRDLIN

ITS OFFICIAL... ROGER, LETS TRY IT

1nate7

You won't be able to fit the front wheels on the hub unless you bore them out. If you really are set on this, I'd look for the old 18" 6 spoke track wheels that look similar to the TE37. They are forged and made by Rays, weigh in around 18 lbs. Otherwise I don't think it's worth the hassle to try and fit some heavy 17's on there. You will have to replace the tires anyway, they use different sizes.