Gloffer

Does anyone need any special tools for tomorrow's Tech Day. I live about 10 minutes away from Earnhardts and have a relatively large and varied tool supply.

I'm NOT doing anything special to my car tomorrow and would be happy to lend out anything you might NOT have readily available. I plan on bringing a few items just in case, but if there's anything special you might think of let me know and I'll bring it along.

RedChili

I need something to empty my rear diff. I'm going to change it out with LE607.

Zonie

There will be plenty of gravity on hand.

asu_lee

Do I need a 20, 22 or a 24 for the oil? Can't remember.

Mike, Would bring a torque wrench?
-Lee

asu_lee

I am bringing the gravity.
-Lee

Zonie

Lee, you mean the oil pan or are you talking about the diff? I thought the oil pan drain bolt was much smaller than that, like 16mm or 18mm?

asu_lee

You need the tube that screws to the top of the le607 can. Get it at autozone/checker.

-Lee

Gloffer

I've got all that stuff and will bring it. Gravity excepted, because it always works.

The oil drain & tranny fill bolt are both 17 mm. The tranny drain is a 3/8" drive insert. The diff drain is 24 mm and the drain is 23 mm. Torque spec for all is in the 30 ft-lb range.

asu_lee

[QUOTE=Zonie,Nov 17 2006, 08:53 AM] Lee, you mean the oil pan or are you talking about the diff?

seminole2001

Jordan needs a Apron.