Clutch job - How many hours?
#11
I did mine a couple months back. Took me about 8 hours. Ended up breaking the knock sensor because starter wouldnt come out, so watch out for that. Soon after my master cylinder gave out so I replaced both the master and slave cylinders. I would suggest getting someone to help you too its definitely a two man job.
Like most people here I lifted the car enough to get in there, removed the motor mounts with a jack supporting it. I then removed the trans mounts and tilted the engine upward so the trans part faced downward. My car had a wire tuck tho, seemed like the upper electricals rub a little and some seemed to stretch so have a person watch out for those while your tilting it.( If your going that route)
Good Luck
Like most people here I lifted the car enough to get in there, removed the motor mounts with a jack supporting it. I then removed the trans mounts and tilted the engine upward so the trans part faced downward. My car had a wire tuck tho, seemed like the upper electricals rub a little and some seemed to stretch so have a person watch out for those while your tilting it.( If your going that route)
Good Luck
Thread
Thread Starter
Forum
Replies
Last Post