When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
These brakes are amazing on the track, but a little noisy on the street. (you can buy McLaren anti rattle hardware to quiet them) They are full floating rotors on a custom hat. (EMI Racing) These calipers are Brembo's high-performance model which have been used on the McLaren F1 super car and Honda's HSC Prototype. These calipers are much lighter than the standard off the shelf "Lotus" caliper used in the Gran Turismo kit. Larger pistons and a larger sweep area increase braking torque.
They have under 10,000 miles on them, working perfectly. I have a set of Ferodo DS2500 and DS3000 pads (track use only) that goes with these. These aren't for the meek, and I'm not aware of another S2000 with these brakes fitted to it. These are simply the best brakes I have ever used.
Track Rats, this is your chance to have lightweight brakes that last lap after lap with NO FADE.
With this set comes carbon fiber backing plates for the front that attach to a cooling hose fed air through carbon fiber inlet designed for a stock AP1 front bumper.
is it a 4-piston front AND 4-piston rear? deletion of parking brake? rotor size front and rear? do these have dust seals would you separate the front and rear kit?
Originally Posted by petawabit,Jun 28 2009, 07:18 PM
more details please for brakes that are 4500.
is it a 4-piston front AND 4-piston rear? deletion of parking brake? rotor size front and rear? do these have dust seals would you separate the front and rear kit?
4 Piston front AND rear. No dust shields, no parking brake and I will not break up the set. They have been in a box for some time, but I'll get them out and measure them... I want to say they are 11.xx" rear and 13.xx" front.
Originally Posted by petawabit,Jun 28 2009, 08:02 PM
4500 is a steal then. At first, I thinking it was just for the front set only
Thanks and I agree, they are priced at a steal. I've been tossing a few things on s2ki before I go to ebay lately. Just not much money getting tossed around on s2ki in the past couple of months. The custom Kinesis wheels that I have drew no interest and they fit around these brakes PERFECTLY.
Originally Posted by lautll421,Jun 28 2009, 08:08 PM
woww....is the stock brake cylinder can cope with this?
Yeah, the master cylinder does fine. I had a proportioning valve in the car though, it was easier to modulate lap after lap with hot pads. They were too touchy under trail braking and with the proportioning valve it was more predictable.
06-28-2009 | 05:33 PM
"One Off" Brembo Big INDY Brakes
