Mark this thread as Sold
Greddy SE Dual Exhaust
#1
Greddy SE Dual Exhaust
SOLD
I installed this exhaust in late September last year and I was immediately bothered by how loud it was. Most people told me it was one of the quietest aftermarket exhausts out there, and weather that is true or not, it is too loud for me. I finally found a Fujitsubo Legalis R for sale and jumped on it (the Fuji seriously sounds stock until you get on it, perfect for me). It comes with all hardware and gaskets that it came with. I did have some fitment issues with this exhaust, and have heard the same thing from a lot of other members. I was able to fix the issue by bending the driver side rear most hanger towards the back of the car about a half an inch (the hanger on the car, not the exhaust). I am a perfectionist though, so you may not even notice it. The exhaust has approx 4,000 miles on it. I am going to leave it for sale for a little bit and hope to get a local sale, otherwise I will open it up to shipping (I don't have the box it came in so I will have to locate something). I am looking for $1,000 picked up. Anyways, here are the pics (as you can see it needs to be cleaned up a little bit, I don't have the materials with me to do it since the exhaust is at my office with me):
[attachment=18922hoto 3 (1).JPG]
[attachment=18920hoto 2 (2).JPG]
[attachment=18921hoto 4.JPG]
[attachment=18923hoto 1 (2).JPG]
[attachment=18924hoto 5.JPG]
Here some pictures of the tips. I clearly drove through some sort of tar and got some of it on the exhaust. There isn't really any on the mufflers, only the tips for some reason. I took some cleaner wax to it and got rid of some of it, but I think some bug and tar remover may be the way to go? If you take your finger nail and scratch it off it comes off easily and there is no sign it was there after that, so I know there is no permanent damage, I just don't have any tar remover and done have the time to scratch each spec off with my nails.
[attachment=18925hoto 3 (2).JPG]
[attachment=18931hoto (1).JPG]
These pics are from when I first installed it:
[attachment=18927hoto 2 (3).JPG]
[attachment=18928hoto 3 (3).JPG]
[attachment=18929hoto 1 (3).JPG]
I installed this exhaust in late September last year and I was immediately bothered by how loud it was. Most people told me it was one of the quietest aftermarket exhausts out there, and weather that is true or not, it is too loud for me. I finally found a Fujitsubo Legalis R for sale and jumped on it (the Fuji seriously sounds stock until you get on it, perfect for me). It comes with all hardware and gaskets that it came with. I did have some fitment issues with this exhaust, and have heard the same thing from a lot of other members. I was able to fix the issue by bending the driver side rear most hanger towards the back of the car about a half an inch (the hanger on the car, not the exhaust). I am a perfectionist though, so you may not even notice it. The exhaust has approx 4,000 miles on it. I am going to leave it for sale for a little bit and hope to get a local sale, otherwise I will open it up to shipping (I don't have the box it came in so I will have to locate something). I am looking for $1,000 picked up. Anyways, here are the pics (as you can see it needs to be cleaned up a little bit, I don't have the materials with me to do it since the exhaust is at my office with me):
[attachment=18922hoto 3 (1).JPG]
[attachment=18920hoto 2 (2).JPG]
[attachment=18921hoto 4.JPG]
[attachment=18923hoto 1 (2).JPG]
[attachment=18924hoto 5.JPG]
Here some pictures of the tips. I clearly drove through some sort of tar and got some of it on the exhaust. There isn't really any on the mufflers, only the tips for some reason. I took some cleaner wax to it and got rid of some of it, but I think some bug and tar remover may be the way to go? If you take your finger nail and scratch it off it comes off easily and there is no sign it was there after that, so I know there is no permanent damage, I just don't have any tar remover and done have the time to scratch each spec off with my nails.
[attachment=18925hoto 3 (2).JPG]
[attachment=18931hoto (1).JPG]
These pics are from when I first installed it:
[attachment=18927hoto 2 (3).JPG]
[attachment=18928hoto 3 (3).JPG]
[attachment=18929hoto 1 (3).JPG]
#4
That is a good deal. I have this exact same setup, I love the sound, though the drone is a little excessive at some RPM's. I don't DD mine so it doesn't bother me too much. It sounds very clean though, not ricey at all. Even my redneck friends who drive big trucks thinks it sounds good.