Mark this thread as Sold
FS Vortech V2 Supercharger kit. Northeast PA. $3,000 obo
#1
FS Vortech V2 Supercharger kit. Northeast PA. $3,000 obo
Anyone interested in a Vortech V2 supercharger kit?
I'm thinking of pulling mine off and selling it.
It's the V2 kit with upgraded larger heat exchanger(lots of bent fins from use but works great)
I have the stock 5" pulley(7-8 psi) and also current one that's on is a 3.6" pulley (14.5 psi)
Kit has a lot of miles on it(about 65k or so)
I don't have the stock intake for it as it sucked and I ditched it. I have a custom 4" intake elbow.
Kit right now is making 422whp.
I drilled and tapped a bung for water/meth injection in aftercooler.
Blower has some oil residue coming out(nothing excessive but a little bit) rebuild soon may be a good idea but boosts perfect and can be used as is without worries. Zero shaft play at all.
If I pull it I'd be looking for 3k obo for the kit with both pullies, rebuild kit etc. I am not including AEM EMS, injectors, meth kit or any of those add on parts.
I would also include a rebuild kit for blower.
I am running aem ems but I will include original fmu and map clamp setup.
Kit is complete bolt on ready.
Let me know if interested.
I'm selling to try out a Kraftwerks kit.
Blower is powder coated candy apple red and aftercooler is wrinkle black.
Located in northeast PA.
I'm thinking of pulling mine off and selling it.
It's the V2 kit with upgraded larger heat exchanger(lots of bent fins from use but works great)
I have the stock 5" pulley(7-8 psi) and also current one that's on is a 3.6" pulley (14.5 psi)
Kit has a lot of miles on it(about 65k or so)
I don't have the stock intake for it as it sucked and I ditched it. I have a custom 4" intake elbow.
Kit right now is making 422whp.
I drilled and tapped a bung for water/meth injection in aftercooler.
Blower has some oil residue coming out(nothing excessive but a little bit) rebuild soon may be a good idea but boosts perfect and can be used as is without worries. Zero shaft play at all.
If I pull it I'd be looking for 3k obo for the kit with both pullies, rebuild kit etc. I am not including AEM EMS, injectors, meth kit or any of those add on parts.
I would also include a rebuild kit for blower.
I am running aem ems but I will include original fmu and map clamp setup.
Kit is complete bolt on ready.
Let me know if interested.
I'm selling to try out a Kraftwerks kit.
Blower is powder coated candy apple red and aftercooler is wrinkle black.
Located in northeast PA.
Trending Topics
#9
Bump. Coming off the car soon! I bought a new tensioner adjuster screw as the old one had a crack on the built in washer so that will go in to it. I may also send it out for a rebuild at vortech first. Doing so may slightly increase the price of the kit though. Rebuild costs about $400 plus shipping both ways.
Thread
Thread Starter
Forum
Replies
Last Post