When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
About 4-5K miles. This is a GT3076BB kit, with a .82 exhaust housing and a B cover. The previous owner spent quite a bit of time making this a very reliable kit. This might need hoses and clamps. It does not come with any fuel management. You will need injectors and an AEM. It also does not include a remote filter mount. I strongly recommend this. The intercooler pipes are a bit scratched up from install.
It does not come with an intercooler, the pipe that goes into the manifold, and the bov since i'm running it my current setup.
Reason why i'm selling it also is because the Turbo has a confirmed blown gasket. Definately someone can rebuild this and make this work. This was confirmed by Asura and if anyone wants they can probably have him do it.
Mods
The Inline kits melt the silicone connector at the turbo. The compressor housing has had a ATP turbo elbow professionally welded on to get the coupling away from the manifold.
The manifold has been mildly ported, and ceramic coated By Crucial Racing.
The turbine housing has been mildly ported and ceramic coated...
The downpipe has been ceramic coated. The downpipe ends with a V band clamp.
The wastegate has been routed back into the exhaust at a very shallow angle about 18" from the turbo. This makes it quieter for running tracks like Laguna Seca.
That's it. I will not part it out. Asking $1200 shipped anywhere in the U.S.
It's my understanding that BB turbo's CHRA's cannot be re-built. I'm not an expert but I am really interested in this rebuild process. Him me up if you have any more info on it.
02-26-2009 | 08:12 AM
FS: Almost complete Inlinepro Turbo Kit
