Mark this thread as Sold
FS-2004-2005 AP2 2.2L Engine-Fresh Build
#1
FS-2004-2005 AP2 2.2L Engine-Fresh Build
I have been working on a few customer cars lately and have put my spare motor on the back burner. Now, I am running out of room and would like to find a buyer for it. Currently it is disassembled and clean, ready for me to do a FULL OEM rebuild on. Everything is in mint condition and ready to go. Just would like to find a buyer before investing the money into actually rebuilding it.
Included in the sale will be a full 04-05 AP2 2.2L Engine from the oil pan all the way through the valve cover (long block). It will be completely refreshed using ALL OEM bearings, rings, seals, gaskets, etc. and will have a brand new OEM timing chain tensioner installed. Additionally I will include a fully loaded intake manifold (including fuel rail, injectors, throttle body, etc) with only 30K miles on it as well as a full wiring harness for said motor. You will need to provide spark plugs, coils, and coil cover for the motor as well as alternator, AC compressor, Starter, and Tensioner. Everything else will be included. The motor will be built to OEM specifications through and through and will be palleted and crated appropriately for freight shipping to either your door (additional fee) or to your local FedEx or UPS freight facility.
This is not some random kid building this motor, this is what I do and other members on the board can/will definitely vouch for the quality of my builds.
PRICE: $4,000 OBO 3,750 SHIPPED (residential extra) SOLD!!
CONTACT: PM
PAYMENT: PayPal
LOCATION: Christiana, TN
Really, I want the space, so any DECENT offer will more than likely be accepted. Thanks for looking!
Included in the sale will be a full 04-05 AP2 2.2L Engine from the oil pan all the way through the valve cover (long block). It will be completely refreshed using ALL OEM bearings, rings, seals, gaskets, etc. and will have a brand new OEM timing chain tensioner installed. Additionally I will include a fully loaded intake manifold (including fuel rail, injectors, throttle body, etc) with only 30K miles on it as well as a full wiring harness for said motor. You will need to provide spark plugs, coils, and coil cover for the motor as well as alternator, AC compressor, Starter, and Tensioner. Everything else will be included. The motor will be built to OEM specifications through and through and will be palleted and crated appropriately for freight shipping to either your door (additional fee) or to your local FedEx or UPS freight facility.
This is not some random kid building this motor, this is what I do and other members on the board can/will definitely vouch for the quality of my builds.
PRICE: $
CONTACT: PM
PAYMENT: PayPal
LOCATION: Christiana, TN
Really, I want the space, so any DECENT offer will more than likely be accepted. Thanks for looking!
#2
This is an awesome deal, considering all of the new parts he is supplying and installation of the parts.
I can vouch for Jordan, he re-built a motor for my S2000 in 2012, it runs like a top, and everything was top notch. The attention to detail and cleaning that he put into the motor was amazing. I would not hesitate to by a motor like this from him. He only sells clean parts, and his assembly skills are second to none . I wish he had this motor when I was looking
I can vouch for Jordan, he re-built a motor for my S2000 in 2012, it runs like a top, and everything was top notch. The attention to detail and cleaning that he put into the motor was amazing. I would not hesitate to by a motor like this from him. He only sells clean parts, and his assembly skills are second to none . I wish he had this motor when I was looking
#5
Someone's gotta need a mint engine!
I'll adjust my price to 4000$ shipped to any freight/business location in the US. If you want residential delivery, there will be an additional charge. Essentially you are getting a like new OEM spec engine.
I'll adjust my price to 4000$ shipped to any freight/business location in the US. If you want residential delivery, there will be an additional charge. Essentially you are getting a like new OEM spec engine.
#6
I will also vouch for Jordan. He's worked on my car several times. I drive two and a half hours whenever I need something done I don't trust myself to do. I wouldn't put my s2k in the hands of anyone else. Good luck Jordan. And to whoever buys it, you are buying quality quality work. (Had to say it twice because its true!)
Trending Topics
#8
I will also vouch for Jordan. He's worked on my car several times. I drive two and a half hours whenever I need something done I don't trust myself to do. I wouldn't put my s2k in the hands of anyone else. Good luck Jordan. And to whoever buys it, you are buying quality quality work. (Had to say it twice because its true!)
While I'm at it, here you go
#9
I find the price a bit steep for my blood
that being said you can't put a price on piece of mind and from the following of customers you have If I did not do my own work I would seriously consider purchasing from you due to just the testimonials.
fresh f22 are great for boost if anyone's considering.
Glws sir
that being said you can't put a price on piece of mind and from the following of customers you have If I did not do my own work I would seriously consider purchasing from you due to just the testimonials.
fresh f22 are great for boost if anyone's considering.
Glws sir
#10
Well as stated there is over 1000 just in new parts to be purchased to rebuild it. Shipping will be at a minimum of 250, so that leaves 2750. Pretty fair in my opinion considering what pull-outs have been selling for lately. And not all pull-outs have come with intake manifolds and/or harnesses.
Also, the price is OBO.
Also, the price is OBO.