Mark this thread as Sold
Carbon Fiber Parts and Wheels
#1
Carbon Fiber Parts and Wheels
Hello s2k guys , I just purchased a membership yesterday and I am selling my parts. I took off my parts from my car since January and I am selling them.
First of all, my Volks wheels are LE28 limited edition. (CE Limited Edition) Comes with booklet. The two front wheels are size 225/40/18 (offset are 50+, 18 x 7.5, Bridgestone SO-3 90% tire thread, no curve marks). The two rear wheels are 255/35/18 (offset are 52+, 18 x 8.5, Bridgestone SO-3, both bald, one wheel has a 1 inch curve mark[but you can't really notice it]). You can take it to a shop and get it polished. Also, it comes with lug nuts. **$2,200 OBO**
The Terminator VIS carbon fiber hood (a replica of a Mugen/Seibon hood without the hump on the left side). The condition of the hood is excellent and has no scratch marks. It has only been on the car for two months. **$500 OBO**
The VIS carbon fiber trunk has a big hole in the middle because when I installed the trunk, I forgot to connect the middle light wire with the car wire, so I had to drill a hole in order to open the trunk with my finger. The drilling was just from the outside. Once the middle light is installed, the hole is not visible. There is also a hole on the top of the trunk because I had the APR wing professionally installed by Auto Explosion Body Shop. Besides that, the trunk is in excellent condition. I've had it for two months. **$400 OBO**
APR carbon fiber wing comes with a monkey wrench and the coating is in excellent condition. **$500 OBO**
C-wing carbon fiber tounnal cover has Veilside embossed in the middle of the piece (a replica of Veilside). I drilled a hole on each side and installed the original OEM latch so that it is more secure. **$450 OBO**
I am also selling my Clarion indash tv/vcd/mp3/cd monitor with a remote. I will post up the picture later. It is still on my vehicle. I will have it professionally taken out if a serious buyer is interested. **$400 OBO**
All the prices are negotiable but please no low ballers. For pick up only and cash only. Don't criticize the parts or the prices. Here are the prices I have spent on the parts.
-Volks Wheels: $3,500 not including new set of tires
-The Terminator VIS Carbon Fiber Hood: $600
-VIS Carbon Fiber Trunk: $480
-APR carbon fiber wing: $650
-C-wing carbon fiber tounnal cover: $800
-Clarion indash monitor: $1,200
I live in Long Beach, CA and can be contacted via email at exotics2k@tmail.com or via telephone at 562-394-6417. If I miss your call, leave me a brief message with your contact information. My name is Johnny. Thank you very much.
First of all, my Volks wheels are LE28 limited edition. (CE Limited Edition) Comes with booklet. The two front wheels are size 225/40/18 (offset are 50+, 18 x 7.5, Bridgestone SO-3 90% tire thread, no curve marks). The two rear wheels are 255/35/18 (offset are 52+, 18 x 8.5, Bridgestone SO-3, both bald, one wheel has a 1 inch curve mark[but you can't really notice it]). You can take it to a shop and get it polished. Also, it comes with lug nuts. **$2,200 OBO**
The Terminator VIS carbon fiber hood (a replica of a Mugen/Seibon hood without the hump on the left side). The condition of the hood is excellent and has no scratch marks. It has only been on the car for two months. **$500 OBO**
The VIS carbon fiber trunk has a big hole in the middle because when I installed the trunk, I forgot to connect the middle light wire with the car wire, so I had to drill a hole in order to open the trunk with my finger. The drilling was just from the outside. Once the middle light is installed, the hole is not visible. There is also a hole on the top of the trunk because I had the APR wing professionally installed by Auto Explosion Body Shop. Besides that, the trunk is in excellent condition. I've had it for two months. **$400 OBO**
APR carbon fiber wing comes with a monkey wrench and the coating is in excellent condition. **$500 OBO**
C-wing carbon fiber tounnal cover has Veilside embossed in the middle of the piece (a replica of Veilside). I drilled a hole on each side and installed the original OEM latch so that it is more secure. **$450 OBO**
I am also selling my Clarion indash tv/vcd/mp3/cd monitor with a remote. I will post up the picture later. It is still on my vehicle. I will have it professionally taken out if a serious buyer is interested. **$400 OBO**
All the prices are negotiable but please no low ballers. For pick up only and cash only. Don't criticize the parts or the prices. Here are the prices I have spent on the parts.
-Volks Wheels: $3,500 not including new set of tires
-The Terminator VIS Carbon Fiber Hood: $600
-VIS Carbon Fiber Trunk: $480
-APR carbon fiber wing: $650
-C-wing carbon fiber tounnal cover: $800
-Clarion indash monitor: $1,200
I live in Long Beach, CA and can be contacted via email at exotics2k@tmail.com or via telephone at 562-394-6417. If I miss your call, leave me a brief message with your contact information. My name is Johnny. Thank you very much.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post