Name:Vee
Location: San Francisco CA
Payment: Cash or Paypal + 5% (i charge a bit more b/c i hate dealing with transfers)
Contact: PM
Shipping: Most Likely USPS (right down my block)

I have some complete and incomplete headlights from years ranges 2000 - 2009. Most are ap2 but i also have some ap1. The incomplete headlights are mainly for parts or conversions. They are somewhat repairable consider how my current set was fabricated from damaged lights (can barely tell)

Due to the amount of interest of some parts i've decided to bundle some things together... at the moment ap2 lens are only available as a pair along with frame and shroud. AP1 Lens are only available as a pair along with back housings etc.



Ap2.
1. Both Side USDM Ap2 Headlight Housings - $575 *NOTE, your paying for the housings but i'm throwing in the following listed*
- Includes OEM Philips HID Bulb, 2 ballast (1 working, 1 not)
- Driver Side has some slight imperfections on the lens (no leaks or cracks)
- Passenger side has a slightly damaged mounting tab
FOR PICTURES CHECK MY SECOND POST BELOW!
FOR PICTURES CHECK MY SECOND POST BELOW!
FOR PICTURES CHECK MY SECOND POST BELOW!
FOR PICTURES CHECK MY SECOND POST BELOW!


2. Both Side Frame w/ Shroud and Lens - $110 (have the option of choosing #2,3,4 driver lens)








3. Driver Side USDM Housing Incomplete - $100
- missing, ballast, bulbs, projectors
- damaged back housing and lens need a bit work






4. Driver Side Frame w/ Shroud and Lens - $50 (shroud not pictured)
- lens has scratches on the inside, outside could use some buffing
- scratches from broken projector shroud..




5. Driver Side Frame w/o Lens or Shroud - $25
6. Driver Side Frame bare - $15
8. Passenger Side Frame w/ Shroud - $35
9. Passenger Side Frame w/o Shroud or Lense - $25
10. Passenger Side Frame w/ Damaged Lense, no shroud - $25
11. Passenger Side Frame bare - $15

Ap1.
1. Passenger Side USDM Complete w/ Ballast and Bulb (working) - $220
- could use a bit more cleaning and buffing, slight scratches on lens




2. Both Side USDM Incomplete w/o Projector, Ballast and Damaged Back Housing - $150







3. Passenger Side EDM/JDM Incomplete w/o Projector, Ballast and Damaged Back Housing - $85





4. Donor Back Housings for Plastic Weld, fabrication brackets etc - $15 a side or $25 pair (L+R)

5. Mulderized Smoked Amber Covers - $20



PRICES DO NOT INCLUDE SHIPPING OR PAYPAL FEES!!!!

PRICES DO NOT INCLUDE SHIPPING OR PAYPAL FEES!!!!

PRICES DO NOT INCLUDE SHIPPING OR PAYPAL FEES!!!!



i can do package deals if u pick up multiple items,
These are perfect for DIY or Custom Headlights..

PM with contact info and i will respond shortly. Thanks

 

Where did you get all of these lol?

 

LOL! I was right about to ask the same thing.

 

PM'ed.

 

, why do u want to know............?
on my free time i like to swing by my local honda dealerships with a pry bar with a 10mm wrench.... haha..
i got them from a buddy of mine who actually has a lot more than this, but threw most of them away... most of these came from wrecked vehicles where he got them for projects or just the projectors it self, hence the missing projectors.. Ususally the first to go on a headlight is the back housing, they break super easy...
i've built my set of ap2 using some of these parts, to fabricate missing tabs, etc..




PICTURE OF THE COMPLETE AP2 LIGHTS

 

here was my build... took me a few days to put together, mainly because i needed to wait for the epoxy to set.. NOTICE IT WAS MISSING ALL THE MOUNTING TABS, I HAD TO RETROFIT TABS FROM DONOR AP1 BACK HOUSINGS, ALSO ONE SIDE THE BACK HOUSING WAS NEARLY CRACKED IN HALF... completely epoxied and sealed, i say fitment was now roughly 8/10, only reason it wasn't a perfect fit was because i got lazy and decided to leave it the way it was, the side tab is the main important one for fitment, considering how my custom tab was larger, all i need was to test and drill different mounting spots along with spacers for a perfect fitment...

also while it was already opened, i decided to customize it abit..









this set was literally pieced out together, each piece was off a different set of lights, projectors were off a JDM AP1, (opposite cutoff side, so driver side is brighter), most tabs were off donor ap1 back housings (damaged already), the only thing i didnt have a choice on was the ap2 back housing, there was only 2 decent enough to fabricate with, others literally have a baseball size hole somewhere along the housing..... so the parts i have listed above, are totally rebuildable in my opinion.... those which are completely trashed was already tossed away..

 

PM Sent.

 

Is there anything wrong with that one complete set of AP2 headlights?

 

Whoa.

You can't just swap housings from ap1 to ap2 can you? =\

 

..replied..

the passenger side does have a slightly damaged tab, very easy to fix, the driver side has some scratches on the lens.. they were pulled from 2 seperate wrecked vehicles but i have yet tested for electronic functions.

sadly no, the back housings are different, mounts are the same only turn signal area is different.... other than that, projectors and high beam bowls are the interchangable also...