Mark this thread as Sold
6262 + Other Turbo Parts
#1
6262 + Other Turbo Parts
Name: Jeremy
Contact: PM for fastest response
Location: Panama City Florida 32405
Payment: Paypal, Money Order, Cash
Hello s2ki. I have some parts from an extra turbo kit I purchased last fall, and some other bits I have just laying around in the garage. I am open to any reasonable offers or trades, the worst I can do is say no. Buyer pays for shipping and paypal fees, and of course local pickup is always welcome.
Brand New Precision 6262e, T3 Journal Bearing with a .63 Vband exhaust housing. $800
AEM 30-2710 Peak & Hold Injector Driver. $200
RC1000 Injectors with clips and rail spacers. I bought these and the Injector driver last summer off a reputable member here on s2ki. He said he did not have any idle or sputtering problems with this setup that some people talk about, the only reason for upgrade was he switched to e85 and needed a bigger setup. $250
RC750 Injectors with Plug n Play clips. SOLD
Greddy Intercooler. This is an extra that I have and just dont need. I would rate its condition a 7/10. It has some bent fins but nothing major, and the mounting bracket has been bent a bit. Most of the stuff you see in the picture are pieces of packing peanuts, I just dont have a compressor to blow them out. $150
Freddy Blow Off Valve. I was told when I bought the kit that this was a brand new Greddy blow off valve but I cant find any logo to prove its Greddy and it looks used. $50
Cast Log Turbo Manifold with Vband Wastegate Adapter. I was told this was RevHard but I cant find a logo to prove so. No cracks, overall good condition. $200
Greddy Oil Filter Relocation Kit. SOLD
Replica J's side skirts. I bought these a few years back, rattle canned them just to see how they would look but decided to take them off. Some small cosmetic scrapes on he bottom but you cant see them when they are installed. Pictures will be up soon. $100
Replica FEEL'S Rear lip. Once again I rattle canned this to see how it would look but I didnt like it with my single exit exhaust. Fitment was very good for a replica. $150
I may also be selling a Precision 6265 Journal Bearing with ported shroud, T1R 70mm Stainless exhaust and authentic J's Racing axle spacers if there is interest. Please dont trash my thread, if you have a problem with a part or price, PM me. Thanks for looking
Contact: PM for fastest response
Location: Panama City Florida 32405
Payment: Paypal, Money Order, Cash
Hello s2ki. I have some parts from an extra turbo kit I purchased last fall, and some other bits I have just laying around in the garage. I am open to any reasonable offers or trades, the worst I can do is say no. Buyer pays for shipping and paypal fees, and of course local pickup is always welcome.
Brand New Precision 6262e, T3 Journal Bearing with a .63 Vband exhaust housing. $800
AEM 30-2710 Peak & Hold Injector Driver. $200
RC1000 Injectors with clips and rail spacers. I bought these and the Injector driver last summer off a reputable member here on s2ki. He said he did not have any idle or sputtering problems with this setup that some people talk about, the only reason for upgrade was he switched to e85 and needed a bigger setup. $250
RC750 Injectors with Plug n Play clips. SOLD
Greddy Intercooler. This is an extra that I have and just dont need. I would rate its condition a 7/10. It has some bent fins but nothing major, and the mounting bracket has been bent a bit. Most of the stuff you see in the picture are pieces of packing peanuts, I just dont have a compressor to blow them out. $150
Freddy Blow Off Valve. I was told when I bought the kit that this was a brand new Greddy blow off valve but I cant find any logo to prove its Greddy and it looks used. $50
Cast Log Turbo Manifold with Vband Wastegate Adapter. I was told this was RevHard but I cant find a logo to prove so. No cracks, overall good condition. $200
Greddy Oil Filter Relocation Kit. SOLD
Replica J's side skirts. I bought these a few years back, rattle canned them just to see how they would look but decided to take them off. Some small cosmetic scrapes on he bottom but you cant see them when they are installed. Pictures will be up soon. $100
Replica FEEL'S Rear lip. Once again I rattle canned this to see how it would look but I didnt like it with my single exit exhaust. Fitment was very good for a replica. $150
I may also be selling a Precision 6265 Journal Bearing with ported shroud, T1R 70mm Stainless exhaust and authentic J's Racing axle spacers if there is interest. Please dont trash my thread, if you have a problem with a part or price, PM me. Thanks for looking
#3