Mark this thread as Sold
*JDM Clear Side Marker Installation Instructions by Muz
#1
JDM Clear Side Marker Installation Instructions by Muz.
Applying firm pressure push the amber side marker toward the front of the car.
This will depress the spring clip enabling you to remove the marker by lifting the back end of the side marker out from the body. (You should find using just your fingers to be sufficient but if necessary use a small screwdriver or flat instrument wrapped in cloth to help lift it just enough to get started.)
Here's what you will see once you have released the assembly from the body of the car.
Grasp the marker and socket assembly with both hands.
Continued below...
Applying firm pressure push the amber side marker toward the front of the car.
This will depress the spring clip enabling you to remove the marker by lifting the back end of the side marker out from the body. (You should find using just your fingers to be sufficient but if necessary use a small screwdriver or flat instrument wrapped in cloth to help lift it just enough to get started.)
Here's what you will see once you have released the assembly from the body of the car.
Grasp the marker and socket assembly with both hands.
Continued below...
#4
Continued from above...
Remove the socket assembly by turning it (about 1/4 turn) until it releases from the side marker housing. There is no need to unplug the wires from the socket assembly. (You don
Remove the socket assembly by turning it (about 1/4 turn) until it releases from the side marker housing. There is no need to unplug the wires from the socket assembly. (You don
#5
Thread
Thread Starter
Forum
Replies
Last Post
ONEQUIKSTI
Archived Member S2000 Classifieds and For Sale
2
05-13-2007 05:21 PM
Muz
Australia & New Zealand S2000 Owners
56
04-09-2002 12:54 PM